1、 鎳層硬度HV小于80的全軟態鋁鎳復合材料。(也可用于過渡焊接) Ni- clad-Al strips (Ni :HV80-220) Mild soft Nickel-Aluminium Clading material with hardness of Nickel plating layer less than 80HV. 2、 低內阻鎳帶/片;萑A工程技術人員通過對鎳成分的改良,成功的研制出電阻率為7.6的鎳帶。(一般鎳帶為8.6左右)鎳帶比普通鎳帶低了15%左右。 Nickel strips/plate with low elecity resistance. We make out nickel strips with elecity resistance rate 7.6 after adjusting content of the nickel by Huihua’s technician, while that of normal one 8.6, thus it’s lower than ordianary one. |